Seagate GoFlex Satellite User Manual page 10

1. Introduction
Factory Defaults Button
Figure 2: Reset Button
• Factory Defaults button: Press and release this button to reset GoFlex Satellite to its
original factory settings (normally not necessary—see
Activity Lights
Figure 3: USB 3.0 Adapter Activity Lights
When GoFlex Satellite is connected to your computer, the lights on the USB 3.0 adapter
provide information about the drive's current state.
• Adapter cable activity lights:
• White steady: GoFlex drive is connected to your computer and ready for use.
• White blink: Activity.
• White off: GoFlex drive is not installed or is experiencing a problem.
GoFlex Satellite™ User Guide
Getting to Know GoFlex Satellite
x for more information).
8