Table of Contents
Advertisement
-
<Default configuration>
NA
-
<Command mode>
Immediate Mode, Edit Mode, Reference Mode
-
<Compatible Products>
CAP1300
-
<Examples>
# lan ether show status
lan ip defaultgw
Set the default route, or manual setting of the default gateway that has the management subnet. (If you
want to remove the default gateway address set, you enter the clear.)
<The syntax of the command>
lan ip defaultgw {clear｜(gateway)}
-
<Parameter>
(gateway) Enter the default gateway address.
-
<Default configuration>
NA
-
<Command mode>
Immediate Mode, Edit Mode
-
<Compatible Products>
CAP1300
-
<Examples>
# lan ip defaultgw clear
# lan ip defaultgw 192.168.0.250
lan ip dhcp
Set the static ip to dhcp.
<The syntax of the command>
lan ip dhcp
-
<Parameter>
NA
-
<Default configuration>
DHCP
-
<Command mode>
Immediate Mode, Edit Mode
-
<Compatible Products>
CAP1300
-
<Examples>
# lan ip dhcp
lan ip dns
Set the address of the DNS server for the subnet management.
<The syntax of the command>
lan ip dns {primary | secondary} { (dnsserver) | clear }
327
Advertisement
Table of Contents
