Edimax CAP1300 User Manual page 248

Ac1350 ceiling mount access point
Table of Contents

Advertisement

2.4GHz
WDS
Select "WDS with AP" to use WDS with access point or "WDS
Functionality
Dedicated Mode" to use WDS and also block communication
with regular wireless clients. When WDS is used, each access
point should be configured with corresponding MAC addresses,
wireless channel and wireless encryption method.
Local MAC
Displays the MAC address of your access point.
Address
WDS Peer Settings
WDS #
Enter the MAC address for up to four other WDS devices you
wish to connect.
WDS VLAN
VLAN Mode
Specify the WDS VLAN mode to "Untagged Port" or "Tagged
Port".
VLAN ID
Specify the WDS VLAN ID when "Untagged Port" is selected
above.
WDS Encryption method
Encryption
Select whether to use "None" or "AES" encryption and enter a
pre-shared key for AES consisting of 8-63 alphanumeric
characters.
Press "Apply" to apply the configuration, or "Reset" to forfeit the changes.
248
Edimax Pro NMS

Advertisement

Table of Contents
loading

Table of Contents