System power requirements
There is one power connection on the BDU. This must be connected to a 12 or 24Vdc
supply. Power requirements and consumption are as follows:
Voltage Input Minimum
Voltage Input Maximum
Total Current for ADU and BDU
(Max. @12V)
Required Fuse
Fuse
The fuse is a 15 Amp, fast blow, ATO blade fuse. The installed part is from Littelfuse,
part number 0257015. To replace the fuse, pull fuse out of fuse holder (pliers may be
needed to grip fuse) and press new fuse into fuse holder. Spare fuses are provided
with your Thuraya Mobility terminal.
Table 4. System power requirements
10V
32V
12A
15A
Package materials
13