3-5. Other interior features
Operating the HomeLink
Press the appropriate HomeLink
light on the HomeLink
The HomeLink
as the button is pressed.
Erasing the entire HomeLink
Press and hold down the 2 outside buttons for 20 seconds until the
indicator light flashes.
If you sell your vehicle, be sure to erase the programs stored in the
HomeLink
Before programming
■
Install a new battery in the transmitter.
●
The battery side of the transmitter must be pointed away from the HomeLink
●
Certification for the garage door opener
■
This device complies with Part 15 of FCC Rules and with RSS-210 of the IC Rules.
Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference that may be
received, including interference that may cause undesired operation. WARNING:
This transmitter has been tested and complies with FCC and IC rules. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user' s authority to operate the device.
174
transceiver should turn on.
continues to send the signal for up to 20 seconds as long
memory (all three programs)
memory.
button. The HomeLink
indicator
.