Using the earphones
2s
2s
18 |
M2 IEBT
Using the earphones
Switching the earphones on
WARNING
Danger due to high volume levels!
Listening at high volume levels for long periods of time can lead to
permanent hearing defects.
Before putting the earphones on, set the volume to a low level.
X
Do not continuously expose yourself to high volume levels.
X
Press the power button for 2 seconds.
X
The control panel on the neckband vibrates and you hear the voice prompts
"power on" and "connected" and the LED flashes blue 3 times. The earphones
are switched on.
Switching the earphones off
Press the power button for 2 seconds.
X
The control panel on the neckband vibrates and you hear the voice prompt
"power off" and the LED flashes red 3 times. The earphones are off.