To Connect A Remote Input (Sensor Or Contacts) - Carrier Connect Installation Manual

9
Turn on the 24 Vac power. The thermostat displays the HOME screen. See HOME (page 27) for details.
10 Configure your system as described in this document.

To connect a remote input (sensor or contacts)

NOTE Use the specified type of wire and cable for maximum signal integrity.
Power
Description
Conductor
Maximum length
Insulation
Carrier Connect™
Wi-Fi Thermostat
Installation Guide
N/A
Stranded, twisted pair
If < 100 ft (30.5 meters) 22 AWG, unshielded
If > 100 ft (30.5 meters) 22 AWG, shielded
500 feet (152 meters)
Plenum rated
Carrier Proprietary and Confidential
9
Wiring the Carrier® Connect™ Wi-Fi Thermostat
CARRIER CORPORATION ©2017
All rights reserved