Filter; Lockout - Carrier Connect Installation Manual

Wi-fi thermostat
Table of Contents

Advertisement

Using the Carrier® Connect™ Wi-Fi Thermostat's screens
Screen Name/Description
PROX SENSITIVITY — change the proximity sensing feature from HIGH to MEDIUM to LOW.
Increasing the sensitivity increases the range the sensor can detect presence, but also
increases the possibility of a false presence
DST — enable or disable automatic Daylight Saving Time change in the thermostat
WIRELESS — enable or disable Wi-Fi for the thermostat. If disabled, then the Wi-Fi radio in
this product is turned off and functions such as the following are not available:
Sync Time To Server
Outdoor Temperature via Wi-Fi Geo location
Server & Wi-Fi Errors
Remote Access Services via App or Web
CAUTION If you disable this function after the thermostat has been set up and
connected to the local Wi-Fi network, you must set it up again using the mobile App.
SOUND — adjust the sound made when touching the thermostat

FILTER

Available on the thermostat only.
Use to reset the FILTER ALERT and see the FILTER RESET REMINDER timer information. Press the RESET button
to reset the timer to its configured value in the advanced SYSTEM SETTINGS. See To configure advanced SYSTEM
SETTINGS (page 17).

LOCKOUT

Locks out unauthorized changes made on the touchscreen. All touch interaction is locked out without the unlock
code. After 5 failed attempts, a notification (fault) is sent to the registered owner of the thermostat through Wi-Fi.
More unlock attempts are blocked for 15 minutes.
To set up a new PIN or change the current PIN, select the ENABLE button or the CHANGE PIN button, which
displays on the SET PIN screen. If the thermostat does not already have a PIN, the CHANGE PIN button cannot be
used.
On the SET PIN screen, use the 3 blue-digit PIN wheels to set the PIN. Set the 3-digit PIN and press the orange
Save button to save the PIN and return to the Lockout Screen. Press the DISABLE button to cancel the LOCKOUT
function and reset the PIN to 000. The default is 000 and the range is 1 to 999.
Carrier Connect™
Wi-Fi Thermostat
Installation Guide
Carrier Proprietary and Confidential
34
Default and Range
D:
MEDIUM
R:
HIGH/MEDIUM/LOW
D:
ENABLED
R:
DISABLED/ENABLED
D:
ENABLED
R:
ENABLED/DISABLED
D:
CLICK
R:
OFF, CLICK, or BEEP
CARRIER CORPORATION ©2017
All rights reserved

Advertisement

Table of Contents
loading

This manual is also suitable for:

Connect 33connectstat

Table of Contents