Appendix; Safety Guidelines And Warnings - Cisco AIR-AP1542I-*-K Installation Manual

Safety Guidelines and Warnings

Translated versions of all safety warnings are available on Cisco.com. Additional safety information,
along with regulatory information, is provided in
Regulatory Information".
Warning This equipment is to be installed by trained and qualified personnel, as per these installation
instructions. The installer is responsible for obtaining any required local or national safety
inspections of the structural integrity of the installation by the local authority/inspection department.
Do not operate the unit near unshielded blasting caps or in an explosive environment unless the
Warning
device has been modified to be especially qualified for such use. Statement 364
The cables specified in this installation guide that are used with the specified cable glands provide
Warning
protection against ingress of moisture for a Type 4/IP67 classified enclosure. If substitute cable are
used, the installer must ensure that the size (OD) of the cable meets the acceptable range allowed by
the cable gland.
This equipment must be externally grounded using a customer-supplied ground wire before power is
Warning
applied. Contact the appropriate electrical inspection authority or an electrician if you are uncertain
that suitable grounding is available. Statement 366
Warning Read the installation instructions before connecting the system to the power source. Statement 1004
Warning Ultimate disposal of this product should be handled according to all national laws and regulations.
Statement 1040
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Warning
Statement 1001
A P P E N D I X
Appendix B, "Declarations of Conformity and
Cisco Aironet 1540 Series Outdoor Access Point Hardware Installation Guide
A
A-1