Positioning Of The Ignition And Flame Sensing Electrode; Check Of Combustion Parameters - Potterton SIRIUS FS 50-70 Installation, Operation And Maintenance Manual

16. POSITIONING OF THE IGNITION AND FLAME SENSING ELECTRODE

Figure 16

17. CHECK OF COMBUSTION PARAMETERS

measure the following parameters:
2
Measure the temperature of combustion air near the air inlet to the boiler. The necessary hole must be made by
hole on completion of measurements.
Figure 17
INSTRUCTIONS PERTAINING TO THE INSTALLER
) concentration.
2
BOILER FLUE TEST
POINT HOLE
35
7115344.01 - en