Table of Contents
Advertisement
3.5 SETTING THE DAILY PROGRAM FOR OPERATION IN CENTRAL HEATING AND DOMESTIC HOT WATER MODES
3.5.1 Setting the daily times for central heating mode operation
- Press either of the
a)
b) press the
- Press the
-
- Press the
key to save and exit from the programming function.
3.5.2 Setting the daily times for domestic hot water mode operation
-
D.H.W. daily times program see section 14 (parameter H91).
Setting the daily times for domestic hot water mode operation-Carry out the operations described in section
3.5.1 for program lines 31 to 36.
3.6 SETTING THE MINIMUM CENTRAL HEATING TEMPERATURE
- Press either of the
-
- Press the
keys to set the temperature required.
This operating mode is enabled when minimum temperature central heating mode " " is activated or when
the daily central heating program does not require heat.
N.B – With the outdoor sensor connected, parameter P5 can be used to set the minimum room tempe-
rature in the premises to be heated (night set-back).
INSTRUCTIONS PERTAINING TO THE USER
8
7115344.01 - en
Advertisement
Table of Contents
