Troubleshooting And Faqs - Zte F930 User Manual

Hsdpa multi band 3g
Hide thumbs Also See for F930:
Table of Contents

Advertisement

C h a p t e r

Troubleshooting and FAQs

If you encounter problems while using the phone, or if it performs erratically, you can consult the
information in the chart below. If your particular problem can not be resolved using the information in the
chart, contact the dealer of handset.
Problem
Poor reception
Echo or noise
Unable to select
certain features
Battery will not
charge.
Shortened standby
time
You cannot switch
your phone on.
(U)SIM card error
14
Possible causes
• The network signal is too weak at your current
location, for example, in a basement or near a tall
building, because wireless transmissions can not
effectively reach it.
• The network is busy at the current time (for
example, during peak times, there may be too much
network traffic to handle additional calls).
• You are too far away from a base station for your
service provider.
• Poor network trunk quality on the part of your
service provider.
• Poor local telephone line quality.
• Your service provider does not support these
features, or you have not applied for services that
provide these features.
• The battery or battery charger is damaged.
• The phone‟s temperature is below 0° C or higher
than 45 ° C.
• Poor contact between the battery and charger.
• The standby time is related to your service provider
system configuration. The same phone used with
different service providers‟ systems will not provide
exactly the same length of standby time.
• The battery is depleted. In high-temperature
environments, battery life will be shortened.
• If you are not able to connect to the network, the
phone will continue to send out signals as it attempts
to locate a base station. Doing so consumes battery
power and will consequently shorten standby time.
• Battery power has been depleted.
• (U)SIM card malfunction or damage.
Confidential and Proprietary Information of ZTE CORPORATION 30
Possible solution
Move to a location where the
network signal can be properly
received.
Avoid using the phone at such times,
or try again after waiting a short
time.
You can request a service area map
from your service provider.
Press End Key and dial again. You
may be switched to a better-quality
network trunk or phone line.
Press End Key and dial again. You
may be switched to a better-quality
network trunk or phone line.
Contact your service provider.
Contact the dealer.
Adjust the battery charging
environment to avoid extremes of
temperature
Check all connectors to make sure all
connections have been properly
made.
If you are located in an area where
signaling is weak, temporarily switch
off the phone.
Use a new battery.
Change your location to one where
the network is accessible, or
temporarily turn off your phone.
Recharge the phone‟s battery.
Take the (U)SIM card to your service
provider for testing.

Advertisement

Table of Contents
loading

Table of Contents