Quidway S9300 Terabit Routing Switch
Configuration Guide - MPLS
Intended Audience
This document provides the basic concepts, configuration procedures, and configuration
examples in different application scenarios of the MPLS.
This document describes how to configure the MPLS features.
This document is intended for:
l
l
l
l
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol
Issue 04 (2011-12-26)
NOTE
l
The MPLS function of the S9300 is controlled by the license. By default, the MPLS function is
disabled on the S9300. To use the MPLS function of the S9300, buy the license from the Huawei
local office.
l
The G24SA,G24CA and X12SA boards do not support the MPLS function.
Data configuration engineers
Commissioning engineers
Network monitoring engineers
System maintenance engineers
DANGER
WARNING
CAUTION
TIP
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
About This Document
Description
Indicates a hazard with a high level of risk, which if not
avoided, will result in death or serious injury.
Indicates a hazard with a medium or low level of risk, which
if not avoided, could result in minor or moderate injury.
Indicates a potentially hazardous situation, which if not
avoided, could result in equipment damage, data loss,
performance degradation, or unexpected results.
Indicates a tip that may help you solve a problem or save
time.
About This Document
ii