Projector Body - Panasonic PT-RZ21K Operating Instructions Manual

Projector body

Front
1 2 3 4 5
6 7
Rear
Bottom
Projection direction
1 Remote control signal receiver (front)
2 Power indicator <ON (G)/STANDBY (R)>
Indicates the status of the power.
Attention
f Do not block the ventilation ports (intake and exhaust) of the projector.
30 - ENGLISH
Chapter 1 Preparation — About your projector
6
8
9
15
Side
7
7
10
3 Light source indicator <LIGHT1>
Indicates the status of light source 1.
4 Light source indicator <LIGHT2>
Indicates the status of light source 2.
5 Temperature indicator <TEMP>
Indicates the internal temperature status.
6 Adjustable feet
Adjusts the projection angle.
7 Air intake port
8 Remote control signal receiver (rear)
9 Air exhaust port
10 Control panel (x page 31)
11 Connecting terminals (x page 32)
12 Security slot
This security slot is compatible with the Kensington security
cables.
13 <AC IN> terminal
Connect the supplied power cord.
14 <MAIN POWER> switch
Turns on/off the main power.
15 Security bar
A wire, etc., can be attached to prevent theft.
7
11 12
13 14