Blades, Plates And Grids; Bowl Locking Washer; Safety - Robot Coupe R 2 Ultra Dice Manual

- Turn the blade over, and rub the stone flat against
the underside of the blade to remove the feather
edge formed at step 5.
- Repeat the procedure for the other blade.
- Wash the blade before use.

• BLADES, PLATES AND GRIDS

The blades on the slicing and julienne plates and the
grids on the grating plates are all subject to wear
and should be changed as required to ensure high
quality cutting.

• BOWL LOCKING WASHER

The bowl locking washer is located below the bowl
and holds the bowl in place. If it becomes worn, it
needs to be replaced.
The R 2 Dice/R 2 Ultra Dice are fitted with an
interlock system.
When you open the bowl lid, the motor stops.
When you open the continuous feed lead, the motor
stops.
W A R N I N G
The blades and cutting plates are extremely
sharp. Handle with care.
To avoid splashing when running liquids in the
bowl, allow the blades to come to a complete stop
before opening the lid.
NOTE : The machines are equipped with a thermal
protector which automatically stops the motor if the
machine is overloaded. If this happens, press
the Off button and allow the machine to cool
completely before restarting.
10
R E M E M B E R
Never try to override or defeat the purpose
of, the locking and safety systems.
Never put nonfood objects into the machine
openings.
Only use the food pushers to force the food
into the machine.
Do not overload the appliance.
Never leave the machine running unattended.

SAFETY