Removing The Side Door - GoPro HERO6 Black User Manual

MOUNTING
• Apply adhesive mounts only to clean, dry surfaces. Wax, oil, dirt or
other debris reduce adhesion, which can result in a weak bond and
risk of losing the camera should the connection fail.
• Attach adhesive mounts in room temperature conditions. Adhesives
do not bond properly if applied in cold or damp environments to cold
or damp surfaces.
• Check state and local regulations and laws to ensure that attaching
a camera to equipment (such as hunting equipment) is permitted.
Always comply with regulations that restrict the use of consumer
electronics or cameras.
• During water activities, use a camera tether and Floaty (both sold
separately) for added security to keep your camera afloat.
WARNING: To avoid injury, do not use a tether when mounting
the camera on a helmet. Do not mount the camera directly on
skis or snowboards.
For more information about mounts, visit gopro.com.
WARNING: If using your camera with a GoPro mount or strap
intended for use with a helmet, always select a helmet that
meets the applicable safety standard.
Choose the right helmet for your particular sport or activity
and make sure that it is the right fit and size for you. Inspect
your helmet to ensure that it is in good condition, and follow
the helmet manufacturer's instructions on safe helmet use.
Any helmet that has sustained a major impact should
be replaced. No helmet can protect against injury in
every accident.
90

REMOVING THE SIDE DOOR

In some situations, such as charging the camera within The Frame,
connecting to audio or HDMI accessories, or connecting to a GoPro
drone, you must remove the side door to access the ports.
WARNING: Remove the side door only when you are using the
camera in a dry, dust-free environment. When the door is open
or removed, the camera is not waterproof. Never operate the
camera with the battery door open.
REMOVING THE SIDE DOOR
1. Hold down the Latch Release button and slide the door open.
2. Pull the door off of the camera.
91