GoPro HERO6 Black User Manual page 42

CUSTOMIZING YOUR GOPRO
DEFAULT MODE
Sets the capture mode that your GoPro defaults to when powering up.
The options are Video (default), Time Lapse Video, Looping, Photo, Night,
Burst, Time Lapse Photo, and Night Lapse Photo.
Note: This setting does not affect QuikCapture.
AUTO OFF
Powers off your GoPro after a period of inactivity to save battery life. The
options are 5 minutes, 15 minutes (default), 30 minutes, and Never.
Note: Voice Control is not available when the camera is off unless the Wake On Voice
setting is turned on. When using Voice Control, consider selecting a higher time period
(or Never) for Auto Off.
SCREENSAVER
Turns off the touch display after a period of inactivity to save battery life.
The options are 1 minute (default), 2 minutes, 3 minutes, and Never.
To turn on the touch display again, tap anywhere on the screen. When
the touch display turns off, you can still use the camera buttons and
Voice Control.
BRIGHTNESS
Adjusts the brightness level of the touch display. The options are 10% to
100% (default).
82
CUSTOMIZING YOUR GOPRO
AUTO-ROTATION
This setting determines the orientation of your video or photos to help you
prevent upside down footage.
Setting Description
(Auto Image Rotation) Camera automatically
selects Up or Down, based on the orientation
Auto of the camera when recording begins.
Ensures that your resulting image is always
right-side up.
Camera is set to always capture in right-side
Up (default)
up orientation.
Camera is set to always capture in upside
Down
down orientation.
AUTO LOCK
Locks the touch display to prevent accidental input. This setting is off by
default.
• To turn on Auto Lock, swipe down, then tap [
unlock the screen, swipe down, then tap the touch display.
• To turn off Auto Lock, swipe down, then tap [
]. To temporarily
].
83