Mounting - GoPro HERO6 Black User Manual

MOUNTING

ATTACHING YOUR CAMERA TO MOUNTS
To attach your camera to a mount, you need The Frame (for HERO6
Black/HERO5 Black) and a mounting buckle and/or thumb screw,
depending on the mount you are using.
1. Secure the camera in The Frame:
a. Open the latch.
b. Slide the camera into the frame. The bottom front of The Frame
has a raised edge. Be sure the front of the camera sits flush
against it.
c. Close the door.
d. Lock the latch.
2. Attach The Frame to the mounting buckle.
88
MOUNTING
3. Follow the Mounting Guidelines
mount to a surface.
4. Attach the mounting buckle to the mount:
a. Flip up the mounting buckle plug.
b. Slide the buckle into the mount until it clicks into place.
c. Press down on the plug so that it sits flush with the buckle.
PRO TIP: If you mount your HERO6 Black upside down, the camera
automatically changes the orientation of your image to be right-side up. For
more information, see Auto-Rotation
MOUNTING GUIDELINES
Follow these guidelines when attaching adhesive mounts to curved and
flat surfaces of helmets, vehicles, and gear:
• Attach the adhesive mounts at least 24 hours before use.
• Adhesive mounts must be mounted only on smooth surfaces. Porous
or textured surfaces do not enable a proper bond. When applying
the mount, firmly press it into place and ensure full contact over the
entire surface.
(page 89) to attach an adhesive
(page 83).
89