Samsung GT-E2330B Service Manual page 30

7. Level 2 Repair
1) Place PBA correct location on FRONT
13
2) Beware that you do not damage PBA
1) Assemble REAR from upper earjack part
15
2) After slide open, press and assemble
keypad side
1
1) Be careful not to make scratch and molding damage!
This Document can not be used without Samsung's authorization
2
SAMSUNG Proprietary-Contents may change without notice
14 1) Assemble slide FPCB connector to PBA
2) Beware that you do not damage FPCB
16
1) Assemble REAR screw 4point
- Screw Size : M1.4 * L3.0 (6001-001811)
- Torque : 1.0 ~ 1.2 Kgf·cm
1) Be careful not to make scratch and molding damage!
7-8