Samsung GT-E2330B Service Manual page 28

7. Level 2 Repair
5
1) After turning over LCD PCB's center side
connector actuator lightly, insert slide
FPCB depending on base line
1) Beware that you do not damage FPCB
7 1) Pass UPPER's slide FPCB to LOWER
insertion
groove
1
1) Beware that you do not damage slide FPCB
This Document can not be used without Samsung's authorization
2
SAMSUNG Proprietary-Contents may change without notice
6 1) Attach insulation tape depending on LCD
PCB's guide line.
Guide line
2) Beware that you do not damage FPCB
8 1) Assemble UPPER and LOWER turn-by-turn
Assemble upper hook
Assemble side hook
1) Be careful not to make scratch and molding damage!
7-6
Assemble lower
hook
Push center of lower