Samsung GT-E2330B Service Manual page 29

9 1) Open slide hinge base, and assemble screw
4point
- Screw Size : M1.4 * L1.7 (6001-001530)
- Torque : 1.0 ~ 1.2 Kgf·cm
1) Be careful not to make scratch and molding damage!
1) In slide open status, attach depending on
11
FRONT's guide and hinge plate's attaching
guide.
Attach guide line
1) Beware that you do not damage slide FPCB
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
10 1) After placing FRONT in deginated position
in slide open status, assemble screw 6 point
- Screw Size : M1.4 * L1.7 (6001-002263)
- Torque : 1.0 ~ 1.2 Kgf·cm
1) Be careful not to make scratch and molding damage!
12
1) Set to FRONT's place guide rib and place
main 3*4 keypad
1) Confirm guide rib 8 points attach status
7-7
7. Level 2 Repair