Freezer Basket Or Bin; Door Features; Door Bins; Door Rails Or Bins - Kenmore 106.5942 series Use & Care Manual

l%'eeze_ _B_}_s!_ie/_ e_" B _'_,s
(p c_s_' c bs on sosw_,_'m':_dds}
The freezer basket or bin can be used to store bags of frozen
fruits and vegetables that may slide off freezer shelves.
To Remove and Replace the Freezer Basket or Bin=
1. Remove the basket or bin by sliding it out to the stop. Lift the
front to slide the basket or bin out the rest of the way.
2. Replace the basket or bin by positioning it on the rails. Lift
the basket or bin front slightly while pushing it in fully past
the stops.
DOOR FEATURES
Your model may have some or all of these features. Features
that can be purchased separately as product accessories are
labeled with the word "Accessory." Not all accessories will fit all
models. If you are interested in purchasing one of the
accessories, please call the toll-free number on the back cover
or in the "Accessories" section.
Doo B
{e_:_ s®m® modes
To Remove and Replace the Bins.
1. Remove the bin by lifting it and pulling it straight out.
2. Replace the bin by sliding it in above the desired supports
and pushing it down until it stops.
DQo * B ss
(on s®_'ss® modes)
The door rails or bins may be removed for easier cleaning.
Snap-On Door Rails or Bins
To Remove and Replace the Rails or Bins=
1. Remove the rails or bins by pushing in slightly on the front of
the bracket while pulling out on the inside tab. Repeat these
steps for the other end of the rail or bin.
2. Replace the rails or bins by aligning the ends of the brackets
with the buttons on the sides of the door liner. Firmly snap
bracket onto the tabs above the shelf as shown.
Drop-In Door Rails
To Remove and Replace the Rails=
1. Remove the rails by pulling straight up on each end of the
rail.
2. Replace the rails by sliding the shelf rail into the slots on the
door and pushing the rail straight down until it stops.
{c,_ _} s®me modes}
To Remove and Replace the Bin=
1. Remove the bin by pulling out on the tabs behind the basket
to release it from the door liner.
2. Replace the bin by aligning the tabs with the buttons on the
sides of the door liner. Firmly snap the tabs onto the buttons
as shown.
Ill'
2O