Porter-Cable 690LRVS Instruction Manual
  1. Manuals
  2. Brands
  3. Porter-Cable Manuals
  4. Network Router
  5. 690LRVS
  6. Instruction manual

Porter-Cable 690LRVS Instruction Manual

Porter-cable router instruction manual
Hide thumbs Also See for 690LRVS:
Table of Contents

Advertisement

Quick Links

Instruction
ESPAÑOL: PÁGINA 21
manual
FRANÇAISE : PAGE 41
Routers
MODEL 690LR
Including
Motor and 1001 Base
MODEL 691
Including
Motor and 6911 Base
MODEL 690LRVS
Including
Motor and 1001 Base
6931 BASE
IMPORTANT
Please make certain that the person who is
To learn more about Porter-Cable
to use this equipment carefully reads and
visit our website at:
understands these instructions before
http://www.porter-cable.com
starting operations.
The Model and Serial No. plate is located on the main
housing of the tool. Record these numbers in the
spaces below and retain for future reference.
Model No. ______________________________________
Type ___________________________________________
Serial No. _______________________________________
Copyright © 2004 Porter-Cable Corporation
Part No. 903699 - 11-17-04

Advertisement

Table of Contents
loading

Related Manuals for Porter-Cable 690LRVS

Summary of Contents for Porter-Cable 690LRVS

  • Page 1 MODEL 690LRVS Including Motor and 1001 Base 6931 BASE IMPORTANT Please make certain that the person who is To learn more about Porter-Cable to use this equipment carefully reads and visit our website at: understands these instructions before http://www.porter-cable.com starting operations.

  • Page 2: Table Of Contents

    Improper operation, maintenance or modification of tools or equipment could result in serious injury and property damage. There are certain applications for which tools and equipment are designed. Porter-Cable strongly recommends that this product NOT be modified and/or used for any application other than for which it was designed.

  • Page 3: Safety Guidelines

    SAFETY GUIDELINES - DEFINITIONS It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information. indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

  • Page 4: General Safety Rules

    GENERAL SAFETY RULES* Read all instructions Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
  • Page 5 GENERAL SAFETY RULES* d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

  • Page 6: Additional Specific Safety Rules

    13. Never touch router bits after use. They may be extremely hot. 14. Never tighten collet nut without a bit. 15. Do not use router bits with a diameter in excess of 2-1/2" at RPM above 13,000. Router bits up to 3-1/2" in diameter can be used when speed control is set for 13,000 RPM or less.
  • Page 7 SYMBOL ... volts ... amperes ... hertz ... watts ... kilowatts ... farads µF ... microfarads ... litres ... grams ... kilograms ... bars ... pascals ... hours ... minutes ... seconds ... no-load speed …/min or …min - ... Revolutions or reciprocations per minute or d.c.

  • Page 8: Functional Description

    MOTOR Many Porter-Cable tools will operate on either D.C., or single phase 25 to 60 cycle A.C. current and voltage within plus or minus 5 percent of that shown on the specification plate on the tool. Several models, however, are designed for A.C.

  • Page 9: Operation

    1001 BASE INSTALLING AND REMOVING THE BIT Fig. 1 DISCONNECT TOOL FROM POWER SOURCE. To remove motor unit from base unit: (a) Open the clamp (A) Fig. 1. (b) While holding base, turn power unit COUNTER-CLOCKWISE until the lower pin (B) in the motor housing is disengaged from groove in base.
  • Page 10 (D) on the housing. Open the clamp (A) Fig. 3. Tip the router so that the bit is clear of the work surface. Turn the power unit (F) Fig. 3 CLOCKWISE until the index line (D) on the motor housing reaches the desired depth indicated on the ring.
  • Page 11 INSTALLING THE MOTOR Fig. 5A DISCONNECT TOOL FROM POWER SOURCE. Support motor clamp (Fig. 5A) and loosen motor clamp screw approximately 1/2" with the hex wrench (furnished). Insert motor unit into the base with switch positioned at front of left handle, and align the four pins (A) Fig.
  • Page 12 Stand router upside down on its motor cap (Fig. 8). Clean and insert shank of bit into collet until the shank bottoms. Then back it out approximately 1/16". Place one wrench on flats on chuck and one wrench on collet nut (Fig.
  • Page 13 Fig. 10 Release plunge mechanism by pulling the locking lever (B) Fig. 9 to the left. Lower the plunge mechanism until the router bit touches the work surface. Release the lever and push it to the right to lock the mechanism in this position.
  • Page 14 ADJUSTING THE PLUNGE LOCKING LEVER The plunge-locking mechanism may be adjusted to reposition lever (in locked position), or to compensate for wear. To adjust: Fig. 14 Fig. 16 DISCONNECT TOOL FROM POWER SOURCE. While holding lever in upright position (Fig. 14), remove retaining screw. Continue to hold lever through remaining steps.

  • Page 15: Adjusting Depth Of Cut

    Loosen the clamp screw (A) Fig. 18. Tip the router so that the bit is clear of the wood surface. Turn the motor unit (F) Fig. 18 CLOCKWISE until the index line (D) on the motor housing reaches the desired depth indicated on the ring.
  • Page 16 Place one wrench on the flats of the chuck with the opposite end of the the wrench resting on the bench to your left (Fig. 18C). Place the other wrench on the collet and tighten COUNTER-CLOCKWISE (Fig. 20). Tighten firmly. To remove the bit, reverse the procedure.
  • Page 17 COMPLETE STOP before putting the tool down. SOFT START The Model 690LRVS has a “Soft Start” feature designed to minimize startup reaction torque. VARIABLE STARTING SPEED CONTROL (690LRVS) This router is equipped with a variable speed control (A) Fig.

  • Page 18: Troubleshooting

    TROUBLESHOOTING GUIDE For assistance with your tool, visit our website at www.porter-cable.com for a list of service centers or call the Porter-Cable help line at 1-800-487-8665. Fig. 24...

  • Page 19: Maintenance

    All quality tools will eventually require servicing, or replacement of parts due to wear from normal use. For assistance with your tool, visit our website at www.porter-cable.com for a list of service centers or call the Customer Care Department at 1-800-487-8665. All repairs made by our service centers are fully guaranteed against defective material and workmanship.

  • Page 20: Accessories

    PORTER-CABLE LIMITED ONE YEAR WARRANTY Porter-Cable warrants its Professional Power Tools for a period of one year from the date of original purchase. We will repair or replace at our option, any part or parts of the product and accessories covered under this warranty which, after examination, proves to be defective in workmanship or material during the warranty period.

  • Page 21: Español

    Porter-Cable • Delta products should be obtained by contacting any Porter-Cable • Delta Distributor, Authorized Service Center, or Porter-Cable • Delta Factory Service Center. If you do not have access to any of these, call 888-848-5175 and you will be directed to the nearest Porter-Cable •...

This manual is also suitable for:

691690lr6931

Table of Contents