Porter-Cable 690 Instruction Manual
  1. Manuals
  2. Brands
  3. Porter-Cable Manuals
  4. Network Router
  5. 690
  6. Instruction manual

Porter-Cable 690 Instruction Manual

Router
Hide thumbs Also See for 690:
Table of Contents

Advertisement

Quick Links

899749 - 11-30-01.qxd
2/12/02
Instruction
manual
To learn more about Porter-Cable
visit our website at:
http://www.porter-cable.com
Copyright © 2001 Porter-Cable Corporation
2:24 PM
Page 1
ESPAÑOL: PÁGINA 17
FRANÇAISE : PAGE 35
Routers
MODEL 690
MODEL 6931
IMPORTANT
Please make certain that the person who is
to use this equipment carefully reads and
understands these instructions before
starting operations.
The Model and Serial No. plate is located on the main
housing of the tool. Record these numbers in the
spaces below and retain for future reference.
Model No. ______________________________________
Type ___________________________________________
Serial No. _______________________________________
Part No. 899749 - 11-30-01

Advertisement

Table of Contents
loading

Related Manuals for Porter-Cable 690

Summary of Contents for Porter-Cable 690

  • Page 1 FRANÇAISE : PAGE 35 Instruction Routers manual MODEL 690 MODEL 6931 IMPORTANT To learn more about Porter-Cable Please make certain that the person who is visit our website at: to use this equipment carefully reads and understands these instructions before http://www.porter-cable.com starting operations.

  • Page 2: General Safety Rules

    899749 - 11-30-01.qxd 2/12/02 2:24 PM Page 2 WARNING: SOME DUST CREATED BY POWER SANDING, SAWING, GRINDING, DRILLING, AND OTHER CONSTRUCTION ACTIVITIES contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: ·...
  • Page 3 899749 - 11-30-01.qxd 2/12/02 2:24 PM Page 3 hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. Avoid accidental starting. Be sure switch is OFF before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch ON invites accidents.
  • Page 4 WARNING: There are certain applications for which this tool was designed. Porter-Cable strongly recommends that this tool NOT be modified and/or used for any application other than for which it was designed. If you have any questions relative to its application DO NOT use the tool until you have written Porter-Cable and we have advised you.
  • Page 5 When servicing use only identical replacement parts. MOTOR Many Porter-Cable tools will operate on either D.C., or single phase 25 to 60 cycle A.C. current and voltage within plus or minus 5 percent of that shown on the specification plate on the tool. Several models, however, are designed for A.C.

  • Page 6: Functional Description

    899749 - 11-30-01.qxd 2/12/02 2:24 PM Page 6 FUNCTIONAL DESCRIPTION FOREWORD Porter-Cable routers are designed for continuous, rugged operation to handle the most demanding production applications. SELECTING THE BIT Model 693 is furnished with " and " diameter collets that will accommodate bits with "...
  • Page 7 899749 - 11-30-01.qxd 2/12/02 2:24 PM Page 7 Fig. 2 ASSEMBLING THE MOTOR IN THE ROUTER BASE CAUTION: DISCONNECT TOOL FROM POWER SOURCE. Loosen the clamp screw (A) Fig. 1 to allow the power unit to be set in the base unit.
  • Page 8 899749 - 11-30-01.qxd 2/12/02 2:24 PM Page 8 Tip the router so bit is clear of the wood surface. Turn motor unit (F), Fig. 3 CLOCKWISE until the index line (D) on the motor housing reaches the desired depth indicated on the ring. 10.
  • Page 9 899749 - 11-30-01.qxd 2/12/02 2:24 PM Page 9 " Fig. 5 Fig. 6 REMOVING MOTOR FROM PLUNGE BASE CAUTION: DISCONNECT TOOL FROM POWER SOURCE. Remove clamp screw, flat washer, lock washer, and clamp locking nut. Insert allen wrench (A) Fig. 7, as shown, to contact locking plate.
  • Page 10 899749 - 11-30-01.qxd 2/12/02 2:25 PM Page 10 DO NOT ALLOW WRENCHES TO CONTACT COLUMNS (A) Fig. 9, COLUMNS DAMAGED, RESTRICTING PLUNGE ACTION. NEVER TIGHTEN COLLET NUT WITHOUT BIT INSERTED. TO DO SO MAY DAMAGE COLLET. To remove bit, reverse the foregoing procedure.
  • Page 11 899749 - 11-30-01.qxd 2/12/02 2:25 PM Page 11 Turn lower travel limiting nut until it is approximately " above the top of the plunge housing (see Fig. 13). While holding lower nut, turn upper nut until it “jambs” against the lower nut. CAUTION: The travel limiting nuts must always be “jammed”...
  • Page 12 899749 - 11-30-01.qxd 2/12/02 2:25 PM Page 12 OPERATION CONNECTING TO POWER SOURCE CAUTION: Before connecting router to power source, ALWAYS MAKE SURE SWITCH IS IN THE “OFF” POSITION. Also check that the power circuit is the same as that shown on specification plate of the router.
  • Page 13 899749 - 11-30-01.qxd 2/12/02 2:25 PM Page 13 The speed and depth of cut will depend largely on the type of material being worked upon. Keep the cutting pressure constant but do not crowd the router so the motor speed slows excessively. It may be necessary on exceptionally hard woods or problem materials to make more than one pass at various settings to...
  • Page 14 FACTORY SERVICE CENTER. At approximately 100 hours of use, take or send your tool to your nearest authorized Porter-Cable Service Station to be thoroughly cleaned and inspected. Have worn parts replaced and lubricate with fresh lubricant. Have new brushes installed, and test the tool for performance.
  • Page 15 (model number, type, serial number, etc.). ACCESSORIES A complete line of accessories is available from your Porter-Cable • Delta Supplier, Porter-Cable • Delta Factory Service Centers, and Porter-Cable Authorized Service Stations. Please visit our Web Site for a catalog or for the name of your nearest www.porter-cable.com...
  • Page 16 PORTER-CABLE LIMITED ONE YEAR WARRANTY Porter-Cable warrants its Professional Power Tools for a period of one year from the date of original purchase. We will repair or replace at our option, any part or parts of the product and accessories covered under this warranty which, after examination, proves to be defective in workmanship or material during the warranty period.
  • Page 17 Pour obtenir des pièces et accessoires pour les produits Porter-Cable • Delta, s’adresser à tout distributeur Porter- Cable • Delta, centre de service agréé ou centre de service d’usine Porter-Cable • Delta. Si vous n’avez accès à aucun de ces centres, appeler le 888-848-5175 et on vous dirigera vers le centre de service d’usine Porter-Cable •...

This manual is also suitable for:

6931

Table of Contents