Customizing The Information Displayed - Canon PowerShot G1 X Mark III Camera User Manual

Customizing the Information Displayed

Follow steps 1 – 2 in "Customizing
z
Display Information" ( = 103) to choose
[Custom display 1] or [Custom display 2],
and then press the [
Press the [ ][ ] buttons or turn the [ ]
z
dial to choose information to display, and
then press the [
mark.
To see an example of display, press the
z
[ ] button to return to the [Screen
info/ toggle settings] or [VF info/ toggle
settings] screen.
● For a smaller grid pattern, access [
information display] > [Grid display].
● The following settings are available by choosing [
[Shooting information display] > [Histogram].
- Switch from a brightness histogram to an RGB histogram.
- Reduce the size of the histogram displayed.
Configuring Touch & Drag AF
With Touch & Drag AF, you can move the AF frame by touching or
dragging the screen while looking through the viewfinder.
] button.
] button to add a [ ]
1] tab > [Shooting
1] tab >
Still Images
1
Access the setting screen.
Choose [Touch & drag AF settings] on the
z
[ 2] tab, and then press the [ ] button
( = 31).
2
Configure the setting.
Choose [Touch & drag AF], select
z
[Enable], and then press the [ ] button.
When you choose MENU ( = 31) > [ 4] tab > [Touch Operation]
●
> [Disable], [Touch & drag AF] is set to [Disable] and cannot be
changed.
● AF frames may not be displayed correctly if you switch to
viewfinder display while touching the screen. In this case, lift your
finger and touch the screen again.
Before Use
Movies
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
104