Charging Via Usb - Canon PowerShot G1 X Mark III Camera User Manual

Charging via USB

The battery pack can be charged without removing it from the camera by
using Compact Power Adapter CA-DC30/CA-DC30E and Interface Cable
IFC-600PCU, both sold separately.
1
Insert the battery pack.
Follow step 1 in "Inserting the Battery
z
Pack and Your Memory Card" ( = 20)
to open the cover.
Insert the battery pack as described in
z
step 2 of "Inserting the Battery Pack and
Your Memory Card" ( = 20).
Follow step 3 in "Inserting the Battery
z
Pack and Your Memory Card" ( = 20)
to close the cover.
2
Connect the compact power adapter
to the camera.
( 1 )
With the camera turned off, open the
z
cover (1). Hold the smaller plug of the
interface cable (sold separately) facing
as shown and insert the plug fully into the
camera terminal (2).
( 2 )
Insert the larger plug of the interface
z
cable into the compact power adapter.
3
Charge the battery pack.
CA-DC30: Flip out the plug (1) and plug
z
the compact power adapter into a power
outlet (2).
CA-DC30E: Plug the power cord into the
z
compact power adapter, then plug the
other end into a power outlet.
Charging begins and the USB charge
z
lamp lights up.
The lamp turns off when charging
z
finishes.
Remove the compact power adapter from
z
the power outlet and the interface cable
from the camera.
● To protect the battery pack and keep it in optimal condition, do not
charge it continuously for more than 24 hours.
● When charging another battery pack, always disconnect the
interface cable from the camera before replacing the battery pack
for charging.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
184