Previous Access Points - Canon PowerShot G1 X Mark III Camera User Manual

3
Choose [Switch Network].
Press the [ ][ ] buttons or turn the [ ]
z
dial to choose [Switch Network], and then
press the [ ] button.
A list of detected access points is
z
displayed.
4
Connect to the access point and
choose the smartphone.
For WPS-compatible access points,
z
connect to the access point as described
in steps 5 – 8 in "Using WPS-Compatible
Access Points" ( = 151).
For non-WPS access points, follow steps
z
2 – 4 in "Connecting to Listed Access
Points" ( = 153) to connect to the
access point.
5
Select the camera to connect to.
On the camera selection screen
z
displayed on the smartphone, choose the
camera to begin pairing.
6
Configure the privacy settings and
send images.
Follow steps 8 – 9 in "Connecting to
z
a Smartphone via the Wi-Fi Menu"
( = 146) to configure the privacy
settings and send images.

Previous Access Points

You can reconnect to any previous access points automatically by
following step 4 in "Connecting to a Smartphone via the Wi-Fi Menu"
( = 146).
● To use the camera as an access point, choose [Switch Network] on the
screen displayed when you establish a connection, and then choose
[Camera Access Point Mode].
● To switch access points, choose [Switch Network] on the screen
displayed when you establish a connection, and then follow the
procedure in "Using Another Access Point" ( = 147) from step 4.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
148