Specifying The Region And Edit Points; Selecting The Region In Which Editing Applies - Sony MVS-8000X User Manual

Specifying the Region
and Edit Points
Selecting the Region in Which
Editing Applies
Selecting by control panel
Select the region in which the editing is applied by the
effect consisting of keyframes, using the region selection
buttons in the numeric keypad control block or
Multifunction Flexi Pad control block.
See step 2 of "Recalling a register from the numeric
keypad control block" (page 39).
Selecting by menus
This is convenient for selecting some of the regions
assigned to the numeric keypad control block or changing
the reference region.
Notes
The function of region selection buttons in the numeric
keypad control block or Multifunction Flexi Pad control
block is linked to the menu. If you carry out region
selection by pressing a region selection button, then all the
regions assigned to that button are selected.
1
In the Key Frame menu, press HF7 'Region Select.'
The Key Frame >Region Select menu appears.
On the left of the status area, region selection buttons
appear.
Depending on the region selection state, the following
indications appear.
Green text: the assigned regions include the reference
region.
Orange text: one of the assigned regions is selected.
White text: no assigned region is selected.
When any one or more of the regions assigned to the
region selection buttons is not selected, a red bar
appears within the button indication. The [STORE]
and [RCALL] buttons in the numeric keypad control
block flash amber.
When using the CCP-6224/6324 Control Panel, the
buttons in the <Flexi Pad Module> group appear at the
lower left of the status area, and if you press either
[Region Sel Btn Area] or [Mem Rcl Btn Area], you
can select a region assigned to a region selection
button in the Multifunction Flexi Pad control block or
a button in the memory recall section.
Selection screen for regions assigned to region
selection buttons
Selection screen for regions assigned to buttons in
the memory recall section
2
Press a button indication on the left of the status area,
to select the button you want to assign.
The regions currently assigned to the button you
pressed appear on the right side of the status area.

Specifying the Region and Edit Points

43