Sony MVS-8000X User Manual page 211

Knob Parameter Adjustment Setting
2 LB Image
Position position
To return the letterbox image to the center
In the <Letter Box Position> group, press [Center].
Making enhancer settings
1
In the Switcher >Input >FC Adjust menu, press
[Enhancer], turning it on.
2
Set the following parameters.
Parameter group [1/2]
Knob Parameter Adjustment
2 Detail Gain Adjust the edge
enhancement
sharpness
3 Limiter Adjust the
maximum signal
level to be added
to the original
signal
4 Crisp Set the
amplitude value
for which a low-
amplitude signal
is not
emphasized
5 Level Set the
Depend luminance range
for edge
enhancement
Parameter group [2/2]
Knob Parameter Adjustment
2 Frequency Set the central
frequency for
edge
enhancement
3 H/V Ratio Set the
horizontal/
vertical ratio for
edge
enhancement
Making detailed settings for down-
Setting
conversion
format values
1080i/ –31 to +32
1
59.94,
1080PsF
/29.97
2
1080i/ –36 to + 36
50,
1080PsF
/25
720P/ –30 to +30
59.94,
720P/50
Setting values
0 to 127
0 to 63
0 to 15
0 to 15
Setting values
0 to 3
0 to 7
In the Switcher >Input >FC Adjust menu, select the
input to which the setting applies.
In the <Aspect> group, select one of the following.
Edge Crop: Crop the left and right sides of a 16:9
image to convert it to a 4:3 image.
Letter Box 13:9: Crop the left and right sides of a 16:9
image to make a 13:9 image and add black bars at
the top and bottom of the 13:9 image to make a 4:3
image.
Letter Box 14:9: Crop the left and right sides of a 16:9
image to make a 14:9 image and add black bars on
the top and bottom of the 14:9 image to make a 4:3
image.
Letter Box 16:9: Add black bars on the top and
bottom of a 16:9 image to convert it to a 4:3 image.
Squeeze: Compress a 16:9 image horizontally to
convert it to a 4:3 image.
For details of the image transformations, see the
following figure.
Signal Input Settings (Input Menu)
211