Honeywell FocusPRO TH5000 Operating Manual page 14

Non-programmable digital thermostat

Hide thumbs Also See for FocusPRO TH5000:

Operating

Manual

\ Heating or

cooling system

] does not respond

Press SYSTEM button to set system to Heat. Make sure the temperature

Is set higher than the Inside temperature.

Press SYSTEM button to set system to Cool. Make sure the temperature

is set lower than the Inside temperature.

Check circuit breaker and reset if necessary.

Make sure power switch at heating & cooling system is on.

Make sure furnace door is closed securely.

Wait 5 minutes for the system to respond.

"Cool On" or

"Heat On" is

flashing

Compressor protection feature is engaged. Wait 5 minutes for the system

to restart safely, without damage to the compressor (see page 9).

69-1923EFS-01

Table of Contents