Honeywell FocusPRO TH5000 Operating Manual page 11

FocusPRO* TH5000 Series
Inside
w
v;,:Setlirig..;.
;
' - • .
•••' • . '
M29410
Message flashes until safe
restart time has elapsed
This feature helps prevent damage to the
compressor in your air conditioning or heat
pump system.
Damage can occur if the compressor Is
restarted too soon after shutdown. This fea-
ture forces the compressor to wait for a few
minutes before restarting.
During the wait time, the display will flash
the message Cool On (or Heat On if you have
a heat pump). When the safe wait time has
elapsed, the message stops flashing and the
compressor turns on.
ll
69-1923EFS-01