Samsung N230 User Manual page 95

Computer Backup/Restoration
(Samsung Recovery Solution / For supported models only)
► System Software Backup
1
When the initial menu screen appears, click System Software
> System Software Backup.
2
Specify the Save Path. If your computer has a DVD-Writer, you
can specify the DVD drive as the Save Path.
Select Drive D.
If you have specified a hard disk drive or a removable disk as
the Save Path, the SamsungSoftware folder is created on
the corresponding drive (e.g. D:\) and the system software
programs are saved to that folder. Take care to not delete the
folder.
Select the DVD drive.
3
If you click the Next button, the Software Backup begins. If
you have selected the DVD drive as the Save Path, the "Insert
a blank DVD" message appears. Insert a blank DVD and click
the OK button.
4
After the backup, the System Software Backup is
completed message appears.
• If you want to install the System Software Programs backed
up on the drive, run the SoftwareMediaXX.exe file in the
SystemSoftware folder.
• When installing System Software Programs from the
backed-up DVD, insert the DVD and follow the System
Software Installation directions.
• To delete Samsung Recovery Solution, refer to the Help
section of the program.
Chapter 4
94
Troubleshooting