Samsung N230 User Manual page 47

Connecting an External Display Device
2
Connect the power cord of the connected monitor, TV or
projector and turn the power on.
3
Press the +
Display Manager screen appears where you can select a
display device.
Since pressing the
changes the selection, select a display device.
LCD
CRT
LCD + CRT Clone
LCD + CRT DualView
key combination once. Then the Easy
key while holding down the
(Optional)
• If you cannot select a display device by pressing the
+
following programs depending on your Windows version.
- Windows 7/XP: Easy Display Manager
Install the programs by downloading them from the
website or using the Install System Software menu of the
Samsung Recovery Solution.
key
Alternatively, to set up dual view:
•
Open the Display Settings window in the Control Panel,
select Monitor 2 and select the Expand to fit to this
monitor checkbox to set dual view. For more detailed
information, refer to the Windows online help.
Using the computer
key combination, you have to install the
Chapter 2
46