Samsung N230 User Manual page 88

Computer Backup/Restoration
(Samsung Recovery Solution / For supported models only)
Restoring the computer
Restore is a function that enables restoring the computer to a
saved point when the computer was purchased or a user-saved
point.
The Restore function provides the Basic Restore and Complete
Restore options.
1
– When Windows is running:
Click Start > All Programs > Samsung > Samsung
Recovery Solution > Samsung Recovery Solution.
– When Windows does not start:
Turn the computer on and press the F4 key when the boot
screen (SAMSUNG logo) appears. After a moment, the
computer boots up in Restoration mode and the Samsung
Recovery Solution screen appears.
For computers supporting the touch screen function, the
touch screen function does not work during Restore Mode. In
this case, please use the touchpad or mouse.
2
If the initial menu screen appears, click Restore.
If you click Select by Symptom, the Select by Symptom
menu appears. If you select a symptom, a recommended
restoration option will blink. Click the restoration option to
continue.
3
Select either Basic Restore or Complete Restore from the
Restore menu.
● A Basic Restore restores the major Windows files only
while maintaining the user configuration and data on the C
drive in a short time.
● A Complete Restore deletes the entire C drive and then
restores the contents of the C drive.
Run Complete Restore if the computer does not work even
after Basic Restore has been completed.
Chapter 4
87
Troubleshooting