Table of Contents
Advertisement
Chapter 7 Connector Pinouts
Signal Names and Definitions
50-Pin Connector Input and Output Signals
Table D-6
corresponds the 50-pin I/O signal connectors to the appropriate I/O slot
location. The connectors J10 through J18 are hard wired through the backplane to
I/O slots A3 through A11.
Table 7-6. I/O Slot Locations
Rear Panel Connector
J10
J11
J12
J13
J14
J15
J16
J17
J18
Note: The pin assignments for J10 through J18 are identical. The
pin assignments outlined in
connectors.
Table 7-7
outlines input and output signal definitions on connectors J10 through
J18, which are the nine 50-pin connectors located on the rear panel of the
SSU-2000 Main shelf.
342 SSU-2000 Technical Reference
I/O Slot Location
A3
A4
A5
A6
A7
A8
A9
A10
A11
Table D-7
refer to all nine of these
12713020-003-2 Revision F.01 – January 2007
Advertisement
Table of Contents
