Set Ip Parameters - Symmetricom SSU-2000 Technical Reference

Chapter 2 TL1 Reference

Set IP Parameters

Set IP Parameters
This command sets the Internet Protocol parameters.
Syntax
SET-PRMTR-IP:[tid]::ctag::[addr],[mask],[gate];
Parameter
addr
mask
gate
All IP address values are in the ###.###.###.### format.
Related Commands
Retrieve IP Parameters, on page 77
152 SSU-2000 Technical Reference
Format
Sets the IP address of the SSU-2000.
Sets the IP mask of the SSU-2000.
Sets the IP gate of the SSU-2000.
Description
12713020-003-2 Revision F.01 – January 2007