Table of Contents
Advertisement
Chapter 2 TL1 Reference
Retrieve Reference Parameters
Retrieve Reference Parameters
This command returns the current input reference port and output clock source.
Syntax
RTRV-REF:[tid]::ctag;
Response Format
^^^"port,clksrc,clockCsrc" <cr lf>
where:
= input reference port designated by the aid
port
= selected clock source [CLK-A | CLK-B | NA] for outputs
clksrc
clockCsrc
Related Commands
106 SSU-2000 Technical Reference
= an input port designated as the bypass Clock C source
12713020-003-2 Revision F.01 – January 2007
Advertisement
Table of Contents
