Symmetricom SSU-2000e Technical Reference page 173

LOCKED
HOLD
SELECT
Level 3 Same as Level 2 operation, with the following additions:
CLK {AR|ON|OFF}
CLK [xAy] WARMUP value
CLK [xAy] {MINTAU|MAXTAU} value
Options are:
AR {ON|OFF}
WARMUP
MINTAU
MAXTAU
Level 4 Same as Level 3 operation
Remarks None
Related SETUP,
RestrictionsNone
12713140-003-2 Revision E.01 – January 2007
Puts the software PLL mode into the lock state.
Puts the software PLL mode into the manual holdover
state.
Allows the operator to specify the clock reference.
Enables or disables the clock autoreturn mode (see the
SSU-2000e User's Guide for information on autoreturn).
Sets the clock warm up time in seconds.
Sets the minimum tau value.
Sets the maximum tau value.
STATUS
Chapter 3 ICS Command Reference
SSU-2000e Technical Reference 173
CLK