Siemens SIMATIC PCS 7 Service Manual page 67

Requirements
● The OS Project Editor is running. It is not necessary to make any settings in the OS project
editor.
● A backup copy of the diagnostics screens with project-specific adaptations has been
generated.
● An asset ID has been assigned to each AS and PC station in HW Config.
● Diagnostics settings are updated.
Procedure
1. Select the multiproject (project) in the plant hierarchy.
2. Select the Options > Plant Hierarchy > Create/Update Diagnostics Screens menu
command.
Update the diagnostics screens. You can find information on this in the
System PCS 7; Operator Station Configuration Manual.
Note
Software update of a project up to PCS 7 V7.1.4
The diagnostics screen for the AS detail view is automatically created new for fault-tolerant
automation systems.
● The previous diagnostics screen is saved with a name extension to the "Graphics" folder
● If you want to restore project-specific changes, you have to adapt the automatically
3. Compile the OS of the Maintenance Station.
4. Update the server data of the MS server.
5. Download the MS server.
Additional information
For information on options for accessing maintenance functions, refer to the following
documentation:
● You can find an explanation of how to work with the maintenance station in process mode
in the
● Configuration manual
● Function manual
Software update without utilization of new functions
Service Manual, 03/2016, A5E36200133-AA
of WinCC Explorer.
created diagnostics screen. After the "Create/update diagnostics screens" function,
copy the project-specific changes from the previous diagnostics screen to the current
diagnostics screen.
Process Control System PCS 7; OS Process Control function manual.
Process Control System PCS 7; Operator Station
Process Control System PCS 7; Maintenance Station
Adaptations in the PCS 7 project on the ES
7.6 Adaptations for the Maintenance Station
Process Control
67