Siemens SIMATIC PCS 7 Service Manual page 52

Adaptations in the PCS 7 project on the ES
7.2 General adaptations
3. Go to the input field and enter the project/multiproject in which you have defined the MS
server or execute the following steps:
– In a multiproject:
– For a project:
4. Click "OK".
5. Open SIMATIC Manager in the component view.
6. In the project, select the engineering station in which you wish to insert the "PDM Server"
object.
7. Double-click the "Configuration" object in the detail view.
The hardware configuration of the SIMATIC PC station opens.
If you cannot see the hardware catalog, select the View > Catalog menu command.
The hardware catalog opens.
8. Select SIMATIC PC Station > PDM Server from the list in the folder.
9. Drag and drop the "PDM Server" object to the PC station of the engineering station.
10.Select the menu command File > Save.
11.Download the configuration to the engineering station.
Requirements for diagnostics with SIMATIC PDM
The following conditions must be met for diagnostics of PDM devices from any station (OS
client, maintenance server, etc.):
● The engineering station is accessible.
● SIMATIC PDM is active. (This is the default scenario after the configuration has been
downloaded.)
Additional information
● STEP 7 and SIMATIC PDM Online Help
● Whitepaper
52
Click "Current Multiproject" or "Browse." You can select the current project using the
"Browse" button.
Click on "Current Project" or "Browse." You can select the current project using the
"Browse" button.
SIMATIC; Security concept PCS 7 and WinCC - Main document
Software update without utilization of new functions
Service Manual, 03/2016, A5E36200133-AA