Siemens SIMATIC PCS 7 Service Manual page 45

Requirements
● The operating system including the required components is installed.
● PCS 7 has been installed.
● All applications are closed.
● The software needed for the required library is available, for example, on a shared drive in
the network.
Procedure
The following steps serve as an example.
1. Run the "SETUP" program.
2. Select a setup language.
3. Click "Next".
4. Follow the instructions of the setup wizard and then close the setup program.
5. After installing all the required libraries, you need to install the following libraries from the
latest
– PCS 7 Advanced Process Library (APL)
– PCS 7 Basic Library
Additional information
You can find additional information on the libraries supplied with PCS 7 on the Internet.
PCS 7 Basis Library Readme V8.2 (online)
●
PCS 7 Advanced Process Library Readme V8.2 (online)
●
PCS 7 Basic Faceplates Readme V8.2 (online)
●
● PCS 7 Library:
Software update without utilization of new functions
Service Manual, 03/2016, A5E36200133-AA
Process Control System; SIMATIC PCS 7 DVD over them using the setup of PCS 7:
Note
Installing the current library by means of the PCS 7 setup
The PCS 7 setup always installs the latest version of the library that is available on the
DVD.
LIB-Readme.wri file
Installation of PCS 7 and settings on the ES and OS
6.5 How to Install Additional PCS 7 Libraries
45