Restore Defaults; Software Upgrade - Polycom SoundStation 2W User And Administrator Manual

►White Noise is a signal
whose energy is distributed uni-
formly among all frequencies
within a band of interest, which
for the SoundStation2W™

Restore Defaults

Restoring the defaults will irretrievably remove all
settings and data that have been entered since the
SoundStation2W™ was first installed.
1. Press the Menu button, choose
Admin Setup and press the
Select button, enter passcode (if
required) and press the
key. Choose Diagnostics using
the Scrolling buttons, and press
the Select button.
2. Choose Restore Defaults using
the Scrolling buttons, and press
the Select button. Press the
soft key if you wish to restore
defaults or the
or the Exit button to return to the
Diagnostics submenu.

Software Upgrade

Please refer to the SoundStation2W™ section of the
Polycom website at www.polycom.com for information
on software upgrades.
soft
ENTER
OK
soft key
CANCEL
SoundStation2W™ Administrator Guide - 36
3. Press the Select button to acti-
vate the signal.
►Phone Book entries and Speed Dial
numbers are not lost when restoring
all defaults.