Polycom IP 650 User Manual page 55

Static Forwarding
To enable call forwarding to another party:
1. Do one of the following steps:
— Press
— Press the Forward soft key from the idle display.
2. (Optional) If multiple lines are configured on your phone, select the line
to forward from the list using
3. Using and
then press the Select soft key. The options are:
— Always—For all incoming calls
— No Answer—Once all options to accept calls have been taken
— Busy—When you are already in a call
4. Depending on your selection:
If you select Always, enter a number to forward all future incoming
a
calls to.
Using the Basic Features of Your SoundPoint IP 650 SIP Phone
and select Features > Forward...
and
, select the forwarding type you want to change and
.
3 - 15