Polycom IP 650 User Manual page 43

To place a call using the handset:
1. Do the following steps in any order:
— Pick up the handset.
— Dial the desired number using the dial pad.
Note You can also dial using the SIP URL or IP address. To obtain the IP address of your
phone, press followed by followed by Status > Platform > Phone. The IP address is
listed together with other phone information. For example, 10.3.0.42, sip:
jane@polycom.com.
Press the Name soft key and enter the URL or IP address. Use * for "." and # for
"@". Then press the Send soft key to complete the call.
Support for SIP URL or IP address calling may be disabled. Contact your system
administrator.
To place a call using Hands-Free Speakerphone mode:
1. Do one of the following steps:
With the handset on-hook, press
a
NewCall soft key to obtain dial tone.
Dial the desired number using the dial pad.
With the handset on-hook, dial the desired number using the dial pad.
b
Press
Using the Basic Features of Your SoundPoint IP 650 SIP Phone
, , or the Dial soft key.
, , or the
3 - 3