Density & Gradation Adjustment - Sharp MX-M904 Technical Handy Manual

Automatic Grey Balance Calibration - FACTORY MODE
Note: When adjusting grey balance adjustment before or after routine maintenance, always use the
recommended paper (Mondi 90gsm or equivalent) for optimum image quality.
HIGH DENSITY PROCESS CONTROL:
[Execute]
HALFTONE PROCESS CONTROL:
[Execute]
GREY BALANCE ADJUSTMENT:
Manual Colour Calibration – SERVICE MODE
HIGH DENSITY PROCESS CONTROL:
[Execute]
HALFTONE PROCESS CONTROL:
[Execute]
GREY BALANCE ADJUSTMENT:
GREY BALANCE MANUAL ADJUSTMENT:
Document Solution Centre
SHARP
Density & Gradation Adjustment
Sim 44-06
Sim 44-26
Sim 46-74 [Engine & Printer]
FACTORY MODE
Place printed test pattern onto glass for both Copy &
Printer modes.
Sim 44-06
Sim 44-26
Sim 46-74 [Engine & Printer]
SERVICE MODE
Place printed test pattern onto glass for both Copy &
Printer modes.
Sim 46-21 [for Engine]
Sim 67-25 [for Printer]
Adjust K (17 points) for Copy & Printer Modes.
13