Advertisement
Setting/Using Stream Preset Buttons
The unit contains 10 preset buttons. There are three banks of preset memory locations offering a total of
30 presets. These banks are designated A, B and C and can be selected using the BAND button. The
display in the lower right hand side changes to show the corresponding Preset bank. Each bank will store
10 user-preferred streams. Select the desired stream you wish to save into memory by using the Channel
knob, the direct tuning method or the category tuning method. With the desired stream playing, press
and hold any of the numbered keypad buttons or remote control buttons (0-9); the corresponding preset
number will flash. A confirmation tone is heard, confirming that the preset has been stored. Continue
this procedure for storing all desired streams. To retrieve a preset stream, momentarily press and release
the number button corresponding to the desired stream.
Preset List Mode
To search by list for a preset, press and hold the BAND button to enter Preset Tune mode. When in the
Preset Tune Mode, press and hold the DISP button for 2 seconds; this exits normal preset tuning and
enters a 6-line menu mode which displays the Preset number (A-1), a single space and the 20-character
stream name. While in the Preset List menu, pressing the DISP button once will change to Artist List; a
second press of the DISP button changes to Song List. While the contents of the preset listing are
displayed, turn Channel knob to navigate through the list. When the desired selection is highlighted,
press the Select Button and the stream will be played.
Press and
Hold Band
Button
Press and
Hold Band
Button
5
.
Advertisement
