Nortel 2300 Configuration Manual page 15

Configuration Example –
WLAN Management Software
PN: 1725-36082-001_F.doc
Adding a WLAN Security Switch to the Network Plan
Before WLAN Management Software can be used to configure a
WLAN Security Switch, the WSS must be added to the WMS server.
To add a WLAN Security Switch to WLAN Management Software:
1. Assuming that WMS is installed and a Network Plan has been
created, launch the WMS client and connect to the WMS server.
For more information, see the Nortel WLAN Management Software
2300 Series User Guide.
2. In WMS, click
Configuration
3. In the
Network Plan Tasks
4. In the field, type the IP address for the WLAN Security
IP Address
Switch.
Nortel: WLAN Security Switch 2300 Series with AP-2330
on the tool bar.
panel, under
Other
select .
Upload WSS
15