Install The System Board Air Baffle And The Power Interposer - Lenovo ThinkSystem SR850 Maintenance Manual

Figure 116. System board air baffle removal
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.

Install the system board air baffle and the power interposer

Use this procedure to install the system board air baffle and the power interposer.
Before installing the system board air baffle:
1. Read the safety information and installation guidelines (see "Safety" on page iii and "Installation
Guidelines" on page 51).
2. Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
3. Watch the procedure. A video of this procedure is available from the following links:
• https://www.youtube.com/playlist?list=PLYV5R7hVcs-B2y7oAb54mfyuLrIusa_qE
• http://list.youku.com/albumlist/show/id_50483449
To install the system board air baffle, complete the following steps:
Step 1. Slightly slide power supply 2 out from the power supply bay (see "Remove a hot-swap power
supply unit" on page 93).
Step 2. Align the power interposer to the server, and lower it until it sits firmly in place.
118
ThinkSystem SR850 Maintenance Manual