Operation (Http Operation View); Out Interface - HP MSR1003-8S Command Reference Manual

Examples
# Set the operation type to put for the FTP operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type ftp
[Sysname-nqa-admin-test-ftp] operation put

operation (HTTP operation view)

Use operation to specify the operation type for the HTTP operation.
Use undo operation to restore the default.
Syntax
operation { get | post | raw }
undo operation
Default
The HTTP operation type is get.
Views
HTTP operation view
Predefined user roles
network-admin
Parameters
get: Gets data from the HTTP server.
post: Transfers data to the HTTP server.
raw: Sends the HTTP request specified by the raw-request command to the HTTP server.
Usage guidelines
For the HTTP get or post operation, the content in the HTTP request is obtained from the URL specified by
the url command.
For the HTTP raw operation, the content in the HTTP request is specified by the raw-request command.
Examples
# Set the operation type to raw for the HTTP operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type http
[Sysname-nqa-admin-test-http] operation raw

out interface

Use out interface to specify the output interface for probe packets.
Use undo out interface to restore the default.
47