Snmp-Agent - HP MSR1003-8S Command Reference Manual

Syntax
enable snmp trap updown
undo enable snmp trap updown
Default
Link state notifications are enabled.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
For an interface to generate linkUp/linkDown notifications when its state changes, you must also enable
the linkUp/linkDown notification function globally by using the snmp-agent trap enable standard
[ linkdown | linkup ] * command.
Examples
# Enable GigabitEthernet 2/0/1 to send linkUp/linkDown SNMP traps to 10.1.1.1 in the community
public.
<Sysname> system-view
[Sysname] snmp-agent trap enable
[Sysname] snmp-agent target-host trap address udp-domain 10.1.1.1 params securityname
public
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] enable snmp trap updown
Related commands
snmp-agent target-host
•
snmp-agent trap enable
•

snmp-agent

Use snmp-agent to enable the SNMP agent.
Use undo snmp-agent to disable the SNMP agent.
Syntax
snmp-agent
undo snmp-agent
Default
The SNMP agent is disabled.
Views
System view
Predefined user roles
network-admin
175